Our complete line of Adjustable Control Arms and Sway Bar End Links feature Billet 4130 Chromoly slot loaded Kevlar/Teflon mold injected rod ends and 10.9 grade hardware. Butyl synthetic dust boots are also standard on all POWERTRIX adjustable control arms.

Our Front Sway Bar End Links is the only kit on the market for the Nissan Z32 that incorporates a unique long bolt and shim stack system that allows for a wider range of adjustment, increased rod end range of motion and help prevent rod end binding that can result in premature wear.

Upgrade the performance of your sway bars by eliminating unfavorable play and movement caused by worn rubber or urethane bushings in OEM stock or aftermarket links. The maintenance free, spherical bearing ball joints have zero play and transfers all body roll energy to the sway bar for optimum performance. 

Stock and aftermarket sway bars kits were designed with the stock ride height and have non-adjustable length end links. This causes a weak point in the sway bar system due to the orientation of the links especially when set on the stiffer inner settings on the bar where they are at unfavorable acute angles. The use of adjustable end links allow the setup of the links to be oriented as close to 90 degrees with the bar so the force of body roll is directly translated to the bar instead of the link itself making the sway bar more effective and efficient.

It is also used to help true not perfectly straight bars and to eliminate unwanted directional preload. lt will work with both front stock or aftermarket (Stillen or Suspension Techniques) sway bars. 

Want both Front and Rear Links? 

Select Yes Below to add the Rear Links Set