Replacement Center Section - Adjustable Turn Buckles for Z32 front adjustable camber arms. 

Sold as a set of 2 complete turn buckle assemblies.

QTY 1 = 2 center sections.

Standard Center Sections - are design for increased negative camber adjustment and a small range of positive camber adjustment in reference to the length of the non-adjustable OEM arm length. At their shortest length, the front adjustable camber arms are shorter than the stock arms and induce as much as -3 degrees of camber depending on ride height and wheel and tire set up. 

Extended Center Sections - are used to increased positive camber / correcting excessive negative camber due to lowering via springs or coilovers. At the shortest length the front adjustable camber arms are longer than the non-adjustable OEM arm and can bring camber alignment back into factory specs due to lowering the Z32 .80-1.00"