|
(Refresh page (F5) to insure current information is
displayed)
|
|
SPECIALTY Z STEEL
BRAIDED TURBO LINES
l Use the
"Add to Cart"
button to select choice of Bearings in the
"Select Lines"
drop down box above the image in the Shopping Cart.
Stainless Steel Braided Hoses
featuring an oil restrictor for ball bearing
turbochargers. Required component when upgrading to
ball bearing turbochargers as excessive oil pressure can
ruin the ball bearing center section seal.
l Eliminates factory hard feed
line
l Also available for thrust
(standard) conventional bearing turbos
l Includes: hoses (2x), oil
restrictors (2x), banjo fitting (1x), 90 degree oil fitting
(1x), and instructions.
l Price
includes Shipping. |
$120.00 |
|
|
jwt sport 500
turbos
l Use the
"Add to Cart"
button to select your Transmission in the
"Transmission"
drop down box above the image in the Shopping Cart.
Replace aging
stock turbos with JWT’s most popular street series upgrade
that is a direct bolt on and requires no modifications.
430-480 RWHP capability on 100 octane. Stock is limited due
to core availability and requires good stock cores.
Available for both Auto and Manual Transmission Twin Turbo
Z32s. Upgrade at a lower cost than purchasing new stock
turbos and avoid leaking seals that cause smoking issues
commonly associated with rebuilds.
l
Additional Photo
l
Price includes Shipping. |
$1860.00 |
|
> |
JWT Sport 530 Ball
Bearing turbos
The JWT Sport 530BB (Ball Bearing) Turbo is the excellent
choice for “Best of Both Worlds” application. With almost
NO TURBO LAG, it is best described as having V8 type instant
throttle response. It is rated best all around performance
turbo set for both street and racing applications.
l 450-530 RWHP capability on
100 octane.
l Direct bolt on component but
requires the use of 5 bolt down pipes.
l Steel Braided Restrictor Oil
Feed Lines REQUIRED.
l Supporting
modification/upgrade components are recommended for maximum
HP gains.
l Price
includes Shipping. |
$2850.00 |
|
> |
jwt sport 700 ball
bearing turbos
l Use the
"Add to Cart"
button to select
select your turbo size in the
"Select Turbos"
drop down box above the image.
This is JWT's newest and largest direct fit* Ball Bearing
Turbo upgrade for the Z32. These turbos are based on the
Garrett wheels and housings found on JWT’s "GT28RS Disco
Potato" turbo, which exceeds the earlier GT25/30 in
compressor efficiency and flow.
l 530-630 RWHP capability on
100 octane.
l Direct bolt on component
but requires the use of 5 bolt down pipes.
l Steel Braided Restrictor Oil
Feed Lines REQUIRED.
l Supporting
modification/upgrade components are recommended for maximum
HP gains.
l Available in .64 and .86
Turbine A/R.
Use the .64 A/R to keep lag to a minimum.
Use the .86 A/R excellent for a full drag racing application
and top end HP.
l
Additional Photo.
l Price
includes Shipping. |
$2999.00 |
|
 |
HKS GT 2530 kit
HKS GT Ball-Bearing Sport Turbo Upgrades are bolt-on turbo
upgrade kits for factory turbo-charged vehicles. These kits
consist of new, larger HKS GT turbos designed to bolt
directly on to the stock manifold(s). HKS GT Sport Turbos
are designed and sized to promote maximum power and response
for maximum airflow throughout the RPM band. From the HKS
precision cast turbine and compressor housings to the
specially designed blades, each turbo is crafted to provide
high levels of performance and quality.
l Price
includes Shipping. |
$3995.00 |
|
 |
specialty z
sz-exp90 kit
ALL NEW - Specialty Z
SZ-EXP90 Kit.
EXP = Extreme Power - 900hp capable.
Details coming soon.
l
Additional Photo
l
Price includes Shipping. |
$3600.00 |
 Copyright ©
2007-2008
Powertrix
|
